You can find information knowledge treasure of Certified Energy Manager (CEM) exam training material which will give you great help in the CEM actual test. Choosing Certified Energy Manager (CEM) exam practice questions is to choose to embrace the bright future.
AEE CEM Actual Tests : Certified Energy Manager (CEM)
About AEE CEM Exam Actual Tests
AEE CEM Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Energy Accounting and Economics | 15% | - Energy units and conversions - Time value of money, NPV, IRR, payback analysis - Life cycle costing and economic analysis - Utility rate structures and tariffs |
| Lighting Systems | 10% | - Lighting technologies and efficiency - Design and control strategies - Daylighting integration |
| Boiler and Steam Systems | 4–6 | - Maintenance and optimization - Operation and efficiency |
| Distributed Generation and Renewable Energy | 4–6 | - Solar, wind, biomass, geothermal - Combined heat and power (CHP) - Grid integration and economics |
| Measurement and Verification | 5% | - Baseline development and savings calculation - M&V protocols and standards |
| Codes, Standards and Regulations | 5% | - Energy efficiency codes and standards - Compliance and reporting requirements - Sustainability policies and frameworks |
| HVAC Systems and Building Envelope | 15% | - Load calculation and system selection - Heating, ventilation and air conditioning - Thermal envelope performance |
| Building Automation and Controls | 5% | - Automation and optimization - Building management systems - Control systems and strategies |
| Energy Savings Performance Contracting | 5% | - Guaranteed savings and risk allocation - Contract structures and financing |
| Energy Audits and Instrumentation | 10% | - Audit levels and methodologies - Data collection and analysis - Measurement tools and instrumentation - Energy performance indicators |
| Industrial Systems | 6–8 | - Process energy efficiency - Compressed air, pumping, and drying systems |
| Operations, Maintenance and Commissioning | 5% | - Maintenance best practices - Commissioning and retro-commissioning |
| Energy Storage Systems | 3–5 | - Storage technologies and applications - Integration and benefits |
| Electrical Power Systems and Motors | 15% | - Power factor correction and load management - Power distribution and quality - Motor systems, efficiency and controls |
AEE Certified Energy Manager (CEM) Sample Questions:
1. A compressed air system has a total volume of 247,500 liters. During a 30-minute break in production (air compressor system turned off and no production demand for compressed air), the system pressure drops from
7 bar, gauge (700 kPa, gauge) to 5 bar, gauge (500 kPa, gauge). Calculate the leakage rate in the compressed air system.
A) 32,000 liters/minute
B) 22,750 liters/minute
C) 48,250 liters/minute
D) 16,500 liters/minute
E) 8,250 liters/minute
2. What is a common cause of poor power quality?
A) Incandescent lighting
B) Natural gas turbine power generation by utilities
C) Electronic equipment, such as personal computers
D) Synchronous motors
E) Partially loaded induction motors
3. A controlled valve is full closed when it gets a signal of 4 mA. The valve is full open when it gets a signal of
20 mA. With a control signal of 8 mA, what is the valve position?
A) 75% open
B) 12.5% open
C) 82% open
D) 25% open
E) 45% open
4. How can commissioning reduce the life-cycle cost to owners and operators?
A) Improve the satisfaction of building occupants
B) Improve the performance of energy systems
C) Reduce the cost of change orders during construction
D) All of the above
E) Improve the effectiveness of operations and maintenance
5. According to ISO 50001. when performing internal audits on the energy management system in an organization the internal auditor should do which of the following?
SELECT THE CORRECT ANSWER
A) Focus on the areas of significant energy use
B) Review the written procedures related to the area under audit
C) Assess actual activities as practiced against what the written procedures state
D) Look for opportunities for energy improvement and to minimize bureaucracy in the energy management system
E) All of the above
Solutions:
| Question # 1 Answer: D | Question # 2 Answer: C | Question # 3 Answer: D | Question # 4 Answer: D | Question # 5 Answer: E |
Related Certifications
Over 36784+ Satisfied Customers
785 Customer ReviewsCustomers Feedback (* Some similar or old comments have been hidden.)
Otto -
Passed AEE CEM Today in UK. I used CEM learning materials. Be careful in the exam and good luck to you!
Osborn -
The CEM test answers are valid. It is suitable for short-time practice before exam. I like it.
June -
I remembered all the questions and answers and succeed in the test.
Pandora -
I chose CEM exam questions and answers and i never went wrong. I used them foe practice and passed. These CEM exam dumps are really valid.
Rod -
I just want to let you know I passed my CEM exam today. Your exam closely matched the actual AEE exam. Thanks for your help.
Dunn -
The CEM training materials are quite useful, and I pass the exam successfully, and thank you!
Agatha -
Actual4test offered me CEM preparation material.
Laura -
The CEM exam braindumps contain a good set of questions. I studied the dump over and over, as they predicted that I passed the CEM exam. Thanks to all of you!
Debby -
It is difficult for me to decide which version to buy, so i bought all three versions and i can study at any time. It is a wonderful study experience. I also passed with a high score. It is worthy to buy!
Reg -
Content all seems accurate in the real CEM exam questions. Gays, you can buy the CEM practice materials as well. I have passed my CEM exam just now!
Elroy -
The CEM questions are the 100% covered.
QUALITY AND VALUE
Actual4test Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and Approved
We are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to Pass
If you prepare for the exams using our Actual4test testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before Buy
Actual4test offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.
Our Clients
Here are all the actual test exam dumps for IT exams. Most people prepare for the actual exams with our test dumps to pass their exams. So it's critical to choose and actual test pdf to succeed.
Latest Actual Test
- SC-401 actual testMay 28, 2022
- AZ-400J actual testMay 28, 2022
- SIE actual testMay 28, 2022
- 300-420J actual testMay 28, 2022
Contact Us
From Monday to Saturday
Support: Contact now
If you have any question please leave me your email address, we will reply and send email to you in 12 hours.
Copyright © 2026 Actual4test NETWORK CO.,LIMITED. All Rights Reserved. All trademarks used are properties of their respective owners. Privacy Policy
Mary -
Passed exam with a wonderful marks. Most questions and answers are latest and valid. Still make sure of some incorrect answers while referring this dumps. About 5-6 new questions. Totally valid.